Flowpoint | Pekuma AB

Flowpoint

Flowpoint is a fluid grouting mortar with a rapid hardening time.
It meets the stringent requirements set by BS7533.

Ultrascape Flowpoint is ideal for all tile/stone surfaces where a hard, smooth joint without voids is needed.
The product is well suited for use on walkways, plaza areas, and driveways. It can be used with natural stone, concrete, or cobblestone.

Flowpoint is available in light gray and black colors.

All colors come in two versions, "Standard" or "Smooth".

Standard is best suited for joints of 5mm and upwards.

Smooth is best suited for narrow joints down to 3mm or if an extra smooth joint is desired.

An area jointed with Flowpoint can withstand pedestrian traffic after just one hour.
The same area can withstand vehicle traffic after only 4 hours.

Click on the images for more information and take a look at our brochure.

Flowpoint - rapid set flowable grout

Flowpoint comes in manageable 25kg paper bags

Flowpoint should be mixed loosely so it can be poured onto the surface to be jointed

A 25kg bag requires 4.25 litres of water and must be mixed for between 3 and 5 minutes until a smooth lump-free consistency has been achieved.

Jointing with Flowpoint

It is easy to joint with Flowpoint. Just remember to scrape Flowpoint diagonally across the joints to avoid that half-cured joint sticks to the the rubber scraper and is removed from the joint.

Jointing with Flowpoint

It is easy to joint with Flowpoint. Just remember to scrape Flowpoint diagonally across the joints to avoid that half-cured joint sticks to the the rubber scraper and is removed from the joint.